These units provide the central point of control for the inverter drives, the working parameter settings and BMS interface. To provide protection against power spikes and interruptions or software being corrupted, the core system is protected by using EEPROM microchips that retain memory, 2-stage filtering electrical system and auto reset. Power interruptions are logged for future diagnostics.
A particular software feature helps alleviate over-pressure system shock and associated flow-velocity problems — which, in extreme circumstances, can damage pipework or fittings.
After a power failure, only one pump is allowed to operate at reduced speed and, hence, reduced pressure — allowing pipework risers to refill gradually. When normal system pressure has been restored, the controller will revert to normal operation and allow the remaining pumps to provide full flow, as demand requires.
Another feature that can be enabled is an ‘under-occupancy’ mode for residential buildings with low initial tenancy. The standard cascade pump operation can be over-ridden to just one pump operating.
